My design is a robot face with the keys acting as teeth and the rotary switches as the eyes. Looks cool in concept.
Very cool.
But, I don't see the USB-B port, so I assume you're using the micro-USB port on the Pico. Won't having the edge of the Pico back from the edge of the board make it hard to plug the cable in?
But, I don't see the USB-B port, so I assume you're using the micro-USB port on the Pico. Won't having the edge of the Pico back from the edge of the board make it hard to plug the cable in?
42 words
I think it will be ok. The Pico is up far enough and if needed I can put a 90 connector on it.
23 words